Ocarina of Time
AMD black foliage and haze.
Compatibilidad de juegos
¿Tienes un juego en mente? Comprueba cómo funciona en Lichii, revisa los problemas detectados y elige una versión para probar.
Encuentra un juego
Los datos actuales incluyen 76 registros de juego y entorno y 175 informes sobre Lichii.
¿No encuentras un juego? Si no hay resultados, aún no se muestra ningún informe de Lichii sobre ese juego. No significa que haya fallado una prueba.
Fíjate en la plataforma indicada para distinguir entre distintas versiones de un juego.
Qué significa cada estado: «Unknown»: sin conclusión. «Not booting»: el juego no arrancó. «Boots»: solo se confirmó el arranque. «Runs with issues»: hubo problemas durante la partida. «Playable»: la persona que hizo la prueba pudo seguir jugando.
Compatibility results
Recorded performance
Open a game for its test details. Start with a GPU and build close to your own, then explore the driver, FPS, and gameplay notes.
No games match these filters. Try a different name, GPU, or build, or clear a filter to broaden the search.
Also listed as: OoT
| Build | Status | GPU / CPU | FPS | Details |
|---|---|---|---|---|
| Not provided | runs with issues | RX 6650 XT (RDNA2) / i5-10400F | 25–27 FPS | Open report |
| nx2 `5a50f50e0b` (official PGO artifact of build-80 and local non-PGO build of nx2-latest) | runs with issues | AMD RX 9070 XT (RDNA4, 16 GB) / Ryzen 7 5800X3D (8C/16T), 32 GB RAM | 28–35 FPS | Open report |
| Not provided | runs with issues | AMD RX 9070 XT / Not provided | Not provided | Open report |
| Not provided | playable | RTX 5090 / Not provided | 40–60 FPS | Open report |
| Not provided | unknown | AMD 7600 / Not provided | Not provided | Open report |
| Not provided | runs with issues | RX 9070 XT / Not provided | 10–60 FPS | Open report |
| Not provided | unknown | intel arc b580 / Not provided | 10 FPS | Open report |
| 95 | not booting | AMD RX 9000 series / Not provided | Not provided | Open report |
Problems or notes: A user comment reports that with three shaders built unoptimized, the intro plays and the game reaches Kokiri Forest, with cutscenes at about 25 to 27 FPS. With `EDEN_NX2_NOOPT_SHADERS=all`, it ran at about 16 to 17 FPS. With asynchronous shader compilation on, this build showed a black screen with audio or stayed at “Loading Shaders” at 0 FPS; the user had not waited long enough to determine whether it would finish.
Problems or notes: User reports gameplay at 28–35 fps with 31–36 ms frame time and no saturated thread. The PGO artifact crashes in dynarmic with Unhandled SIGSEGV after 2–10 minutes on this machine; a local non-PGO build was stable over several sessions.
Problems or notes: A commenter reports approximately 3 minutes of gameplay before a black screen, driver crash, and crash to desktop.
Problems or notes: Gameplay testing in Kokiri Forest reported no crashes; normal game speed was below 60 FPS with #216. GPU accuracy was Low.
Problems or notes: A commenter reports having the same issue without further details.
Problems or notes: Comments conflict: one reports 50–60 FPS in Kokiri Forest and Deku Tree on Linux using default/auto/safe/accurate/normal settings, Docked mode, and 1x resolution; another reports at most 25 FPS in open areas and 60 FPS in dungeons, and says performance is poor. A further comment says open areas are generally below 45 FPS while shaders are not loading and suggests Windows performance may be worse.
Problems or notes: User reports the game runs at 10 FPS.
Problems or notes: The reporter says the game hangs on a black screen while outputting normal audio. They report it used to boot on 88 with launch parameters, but no longer does. A commenter reports no video output on build 95 after video output on build 93, and another says Docked Mode with Accurate GPU loads the main menu but audio gets issues again.
Current: build-93 (1 record); previous: build-88 (1 record).
Also listed as: OoT
| Build | Status | GPU / CPU | FPS | Details |
|---|---|---|---|---|
| nx2 @ 27226d2 plus two measurement-only commits | runs with issues | RTX 5060 Laptop (8 GB) / Ryzen AI 9 365 | Not provided | Open report |
Problems or notes: In Kokiri Forest, disabling per-fence Preflushable downloads or batching them by 64 fences caused overexposure. Default per-fence downloads preserved correct exposure. The report measures GPU back-thread draws/s, not game FPS.
Also listed as: OoT
| Build | Status | GPU / CPU | FPS | Details |
|---|---|---|---|---|
| Not provided | unknown | RTX 3080 Ti / i9-12900K | 46–47.8 FPS | Open report |
Problems or notes: A user comment reports same-binary, 300-second headless-harness measurements in Kokiri Forest: median FPS was 46.0 in Full mode and 47.8 in Auto mode. The comment reports correct auto-exposure in both modes and identifies readback bandwidth and stale-constants flicker as visible concerns; no sustained gameplay validation is stated.
Showing 101–110 of 114 reports
Known issues from Lichii sources
AMD black foliage and haze.
HUD flicker.
Cutscene audio drift.
First-launch shader stall on Linux.
An NVIDIA device-lost crash was reported on build 93; the release says it is awaiting retest on this build.
Outdoor areas have far too much fog and glow compared with console; performance is about 12–22 fps on a Ryzen 5900X with an RTX 3080, and three rare shaders remain unsupported.
On RTX 50-series GPUs, the GPU device can still be lost after a scene change.
Recorded fix: Try NVIDIA driver 610.88.
Gameplay is capped at about 30 fps, even though the game asks for 60.
On RTX 50-series GPUs (5070 Ti, 5090), the GPU device can be lost shortly after a scene change.
Recorded fix: Try NVIDIA driver 610.88.
Some textures are still black, and the game can crash later in play.
Showing 1–10 of 188 issues
Notas de versiones recientes
Versión build-94 · Ocarina of Time
Versión build-94 · No indicado
Versión build-94 · No indicado
Versión build-94 · No indicado
Versión build-94 · No indicado
Elegir una versión
build-75 · Publicada el November 5, 2026
12 archivos para descargar en esta versión.
Prueba la última versión disponible: build-94. Conserva una versión que funcione por si necesitas volver a ella durante las pruebas.
Dudas sobre compatibilidad
Aplica los filtros de juego, estado, GPU y versión y copia la URL de la página. Un enlace a un juego concreto abre su ficha de informes.
Revisa en otros informes si el juego llega a los menús o permite jugar. Anota el controlador y el motor de renderizado y busca el juego o el error en la guía de solución de problemas.
La versión del controlador, los ajustes gráficos, la carga de la CPU y el tramo del juego que se prueba pueden cambiar el resultado. Compara estos detalles antes de cambiar tu configuración.
Usa el gestor oficial de incidencias de Lichii. Indica el juego, la etiqueta de la versión, el hardware, el controlador, los ajustes y los pasos para reproducir lo que viste.