After: Dynamic FPS mod bundled and enabled by default; automatic patching is restricted to the supported game build and checks for patch conflicts.
build-83 → build-88
Compatibilidad de juegos
Compatibilidad de juegos con Lichii Emulator
¿Tienes un juego en mente? Comprueba cómo funciona en Lichii, revisa los problemas detectados y elige una versión para probar.
Latest recorded build
build-88
Pre-release
Published November 6, 2026
Encuentra un juego
Buscar juegos compatibles con Lichii
Los datos actuales incluyen 58 registros de juego y entorno y 114 informes sobre Lichii.
¿No encuentras un juego? Si no hay resultados, aún no se muestra ningún informe de Lichii sobre ese juego. No significa que haya fallado una prueba.
Fíjate en la plataforma indicada para distinguir entre distintas versiones de un juego.
Qué significa cada estado: «Unknown»: sin conclusión. «Not booting»: el juego no arrancó. «Boots»: solo se confirmó el arranque. «Runs with issues»: hubo problemas durante la partida. «Playable»: la persona que hizo la prueba pudo seguir jugando.
Compatibility results
Game Compatibility Results
Recorded performance
Performance by Build and Hardware
Open a game for its test details. Start with a GPU and build close to your own, then explore the driver, FPS, and gameplay notes.
No games match these filters. Try a different name, GPU, or build, or clear a filter to broaden the search.
Zelda: Ocarina of Time Reported platform: Windows 11
Also listed as: OoT
| Build | Status | GPU / CPU | FPS | Details |
|---|---|---|---|---|
| Not provided | runs with issues | NVIDIA RTX 30 series or older / Not provided | Not provided | Open report |
| Not provided | runs with issues | AMD RX 9060 XT / Not provided | Not provided | Open report |
| nx2-build-83 | runs with issues | AMD RX 9000 series / Not provided | 41 FPS | Open report |
Not provided report
Statusruns with issues
GPUNVIDIA RTX 30 series or older
CPUNot provided
DriverNot provided
Recorded FPSNot provided
Problems or notes: Audio plays a different part of the game than the image during the intro; the audio is clean but out of sync by a scene. A follow-up report says the game uses StreamType::Render and that traced sink appends were complete with no samples dropped. Another user reports the same issue with a 7800X3D, RTX 5070, and 32gb DDR5.
Not provided report
Statusruns with issues
GPUAMD RX 9060 XT
CPUNot provided
Driver28.10.2
Recorded FPSNot provided
Problems or notes: A commenter reports a driver crash and black screen after the intro on the MSVC build. The PGO build reportedly shows only 2D elements such as the logo or menu.
nx2-build-83 report
Statusruns with issues
GPUAMD RX 9000 series
CPUNot provided
DriverNot provided
Recorded FPS41 FPS
Problems or notes: User reports audio running ahead of video, cutting out and repeating during the opening cutscene, followed by a system freeze at the Deku Tree cutscene requiring a forced shutdown. Settings reported: Vulkan, GPU Mode Fast, Docked, Bilinear window adapting filter, and no anti-aliasing.
Related game issues
- macOS/MoltenVK: Ocarina of Time (0400486024DEC000) kills or hangs the Metal device at the intro-video boundary (open)
- [Crash] (open)
- [Crash] AMD Crash/AudioDesync (open)
- [AMD RX 9070 XT] Black screen with UI visible and GPU driver timeout (Build 88) (open)
- [Crash] Ocarina of Time (0400486024DEC000): freezes in Hyrule Castle Town pot room near the guard (open)
- [Crash] AMD Ocarina of time Doesn't Start (open)
- [GBug] Ocarina of Time (0400486024DEC000): intro freezes for 6 to 18 minutes on AMD while the driver optimizes two compute shaders (open)
- [Perf] OoT (0400486024DEC000): per-fence Preflushable buffer downloads (~430 MB/s) are the biggest GPU back-thread cost; batching them gives +55% draws/s but breaks exposure (open)
- [VBug] OoT Slows when booting. (open)
- Ocarina of Time harvest fork: findings and open tasks (open)
- [Crash] Linux/RADV (RX 9070 XT): invalid SPIR-V fragment shader (depth image u32 sampled as f32) segfaults in VkPipelineBuild, Ocarina of Time (open)
- [Bug] Windows build-83 can hang on Closing software after OoT gameplay (open)
- [GBug] OoT (0400486024DEC000): the same ~60 cached graphics pipelines are rebuilt on the GPU thread every boot (open)
- [VBug] Oot is in a "nightmare mode"? also gameplay speed is at like 30% (open)
- [GBug] Ocarina of Time on RADV (RX 9070 XT): 28-35 fps, 35 ms frame with no saturated thread (translation/sync bound) (open)
- [GBug] Zelda: Ocarina of Time (0400486024DEC000): the audio plays a different part of the stream than the picture (open)
- [VBug] [nx2-build-75] Zelda: Ocarina of Time (0400486024DEC000) black screen — no AV1 decoder (open)
- [VBug] OoT (0400486024DEC000): world renders black except areas lit by Navi and around Link, AMD RX 9070 (open)
- Release note: Outdoor areas have far too much fog and glow compared with console; performance is about 12–22 fps on a Ryzen 5900X with an RTX 3080, and three rare shaders remain unsupported.
- Release note: On macOS arm64 through MoltenVK, the Metal device may be lost or the GPU thread may hang at the intro-video/gameplay boundary. A commenter attributes the device loss to an attachment-less framebuffer reaching 32768×32768, above the stated Apple GPU limit of 16384.
- Release note: After a local workaround for device loss, a commenter reports that the 3D scene remains black while sound and subtitles work on an older Eglantine fork; current nx2 behavior was not yet checked.
- Release note: User reports a crash when opening the game on Arch Linux with an AMD Radeon AI PRO R9700 (9070XT); the console reports a segmentation fault.
- Release note: User reports audio/video desynchronization during the opening cutscene and a system freeze at the Deku Tree cutscene on Vulkan with an AMD RX 9000 series GPU. Comments report crashes on AMD GPUs, including while building shaders. One commenter reports that OpenGL GLSL stops the crashes but leaves only the UI visible.
- Release note: On some AMD GPUs, the UI may remain visible while the 3D world is black; reports also describe AMD driver timeouts or crashes.
- Release note: User-reported reproducible freeze when walking deeper into the pot room in Hyrule Castle Town, near the guard.
- Release note: The issue reporter using an AMD RX 6600 8GB on Windows 10 reports that the emulator starts loading and then remains on a black screen.
- Release note: Commenters report rendering failures, black screens, and AMD driver crashes; one reports that audio continues while rendering is crashed.
- Release note: On AMD's proprietary Windows driver, two compute pipelines can take 6 to 18 minutes to compile during the intro, leaving the game at 0 FPS while audio continues. Rejecting the shader hashes avoids the wait but causes black areas in the intro, title, and castle scenes.
- Release note: In the measurement-only experiment, disabling per-fence Preflushable downloads or batching downloads by 64 fences caused overexposure in Kokiri Forest.
- Release note: A commenter reports that an experimental compute storage write-extent analysis reduced marked GPU-written data and fence copies while preserving correct auto-exposure. It was described as code on a user's branch, not as an upstream or validated release fix.
- Release note: Static review and a separate research comment describe read-trap bookkeeping and dirty-state issues that can leave stale GPU-written data when per-fence downloads are disabled; proposed corrections and batching remain untested or local experiments.
- Release note: Slows when booting.
- Release note: Community comments describe AMD black or corrupted-world output, fragment-pipeline compiler crashes on Windows, later timeouts or TFB stalls, corrupted output, and a RADV depth-image SPIR-V failure. These are separate reported cases; the comments do not establish a universal cause or resolution.
- Release note: User reports a segfault during gameplay on Linux with an AMD RX 9000-series GPU and RADV, when a graphics pipeline is built for an invalid fragment shader.
- Release note: On Windows build-83, shutdown can hang at “Closing software…” after gameplay. Some sessions completed shutdown successfully; the cause is undetermined.
- Release note: Persistent graphics pipeline cache entries are reportedly rebuilt on the GPU thread during gameplay on repeated boots, causing a visible hitch.
- Release note: With GPU Mode: Accurate (High), gameplay may run in slow motion at about 30 FPS; shader compilation can cause stutter on new content.
- Release note: PGO artifact crashes in dynarmic with Unhandled SIGSEGV after 2–10 minutes on the reported machine.
- Release note: Clean audio from a different point of the game plays while the intro image is displayed; audio and picture are substantially out of sync.
- Release note: In gameplay, the world renders almost entirely black, with only the HUD and some areas near light sources visible; some shapes appear blown out with heavy bloom.
Compared with Previous Build
From build-83 to build-88: follow the gameplay changes described for these two builds.
Zelda Ocarine of time Reported platform: Windows 11
| Build | Status | GPU / CPU | FPS | Details |
|---|---|---|---|---|
| build-75 | runs with issues | NVIDIA RTX 30 series or older / Not provided | Not provided | Open report |
build-75 report
Statusruns with issues
GPUNVIDIA RTX 30 series or older
CPUNot provided
DriverNot provided
Recorded FPSNot provided
Problems or notes: The report describes audio with no visuals. A commenter reports the title screen at 60 FPS followed by a black screen when starting a new game, with an AV1 decoder error. Other users report black screens, crashes, very low FPS, missing textures, lighting and graphics artifacts, and a blown-out white image.
Related game issues
- [VBug] Video doesn't display on Zelda Ocarine of time (open)
- Release note: Black screen after starting a new game, with audio continuing; a commenter also reports an FFmpeg error stating there is no decoder for video/av1.
- Release note: Very low FPS and graphics problems, including missing textures, lighting or ambient occlusion issues, and a blown-out white image.
Compared with Previous Build
Current: build-75 (1 record); previous: build-70 (0 records).
Showing 111–114 of 114 reports
Known issues from Lichii sources
Known Game Issues
The Legend of Zelda: Ocarina of Time
User reports GPU driver timeout or device loss when gameplay starts on AMD Windows systems, including RX 7900 XTX and RX 9060 XT. Reports associate the issue with #150 pointer-binding changes, but this is an unconfirmed hypothesis.
Zelda: Ocarina of Time
PGO artifact crashes in dynarmic with Unhandled SIGSEGV after 2–10 minutes on the reported machine.
Other / not listed
After the startup screen, audio plays but the screen is black.
Other / not listed
The emulator closes while loading shaders before a game is opened; the report says it used 20GB of RAM. Reports mention Windows 11 and Linux, and AMD GPUs.
Legend of Green hat boy
User reports the game crashes after about 15 to 20 minutes.
Legend of Green hat boy
User reports the game blacks out when booted in build 83; they state it worked in build 75.
Legend of Green hat boy
The emulator crashes after 5 to 10 minutes of gameplay on Linux with an AMD RX 9000 series GPU.
Zelda: Ocarina of Time
Clean audio from a different point of the game plays while the intro image is displayed; audio and picture are substantially out of sync.
The Legend of Zelda: Ocarina of Time
On build-75, user reports over-bright bloom/glow, overly dense fog, incorrect lighting, and some textures decoded as garbage; logs include macro-parameter assertions and an unknown texture format 100.
The Legend of Zelda: Ocarina of Time
Textures and surfaces flicker with Low GPU accuracy and EDEN_NX2_SPLIT=2 on Radeon RX 9070 XT; some surfaces remain white temporarily.
Showing 41–50 of 98 issues
Notas de versiones recientes
Cambios de compatibilidad en las últimas versiones
Versión build-88 · No indicado
Integrated performance ports and reduced unnecessary writer tracking; added explicit GPU-to-host visibility before buffer readback and submitted native desktop GPU work earlier while preserving conservative synchronization for macro reads and semaphore waits.
Versión build-88 · No indicado
Added bounded background preparation of cached graphics pipelines and persistent task/mesh shader state. Updated the Vulkan cache to v53 while preserving compatible v52 caches, and made interrupted cache migrations retryable.
Versión build-88 · No indicado
Fixed temporal history, motion interpolation, image transitions, and descriptor retirement for FSR3 frame generation; frame generation remains off by default.
Versión build-88 · Zelda: Ocarina of Time
Bundled Dark's Dynamic FPS mod, enabled by default for Ocarina of Time. Disable it independently in the game's Add-Ons settings. Max Resolution remains a separate Add-On. CPU Clock Normal is recommended when evaluating the mod; Boost/Overclock can affect game speed. Full gameplay timing has not been verified.
Versión build-83 · Ocarina of Time
Fixed missing vegetation, incorrect materials and lighting, a glowing doorway, one-frame white flashes, and an AMD black 3D scene. Added Max Resolution (built-in), enabled by default for the supported game build, and Ocarina-specific frame-ahead presentation tuning.
Elegir una versión
¿Qué versión debo usar?
Elige un juego arriba para ver qué versiones probadas puedes descargar. Mientras tanto, usa la descarga más reciente y lee sus notas.
Prueba la última versión disponible: build-88. Conserva una versión que funcione por si necesitas volver a ella durante las pruebas.
Dudas sobre compatibilidad
Preguntas frecuentes sobre compatibilidad de juegos
¿Cómo comparto un juego con estos filtros?
Aplica los filtros de juego, estado, GPU y versión y copia la URL de la página. Un enlace a un juego concreto abre su ficha de informes.
¿Qué puedo probar si aparece una pantalla negra?
Revisa en otros informes si el juego llega a los menús o permite jugar. Anota el controlador y el motor de renderizado y busca el juego o el error en la guía de solución de problemas.
¿Por qué puede dar resultados distintos la misma GPU?
La versión del controlador, los ajustes gráficos, la carga de la CPU y el tramo del juego que se prueba pueden cambiar el resultado. Compara estos detalles antes de cambiar tu configuración.
¿Dónde puedo aportar un resultado que no aparece?
Usa el gestor oficial de incidencias de Lichii. Indica el juego, la etiqueta de la versión, el hardware, el controlador, los ajustes y los pasos para reproducir lo que viste.