The Legend of Zelda: Ocarina of Time
The emulator closes when loading Hyrule Market after the user exits Kokiri Forest and enters Hyrule Castle.
Compatibilidad de juegos
Compatibilidad de juegos con Lichii Emulator
¿Tienes un juego en mente? Comprueba cómo funciona en Lichii, revisa los problemas detectados y elige una versión para probar.
Latest recorded build
build-117
Published November 7, 2026
Encuentra un juego
Buscar juegos compatibles con Lichii
Los datos actuales incluyen 108 registros de juego y entorno y 308 informes sobre Lichii.
¿No encuentras un juego? Si no hay resultados, aún no se muestra ningún informe de Lichii sobre ese juego. No significa que haya fallado una prueba.
Fíjate en la plataforma indicada para distinguir entre distintas versiones de un juego.
Qué significa cada estado: «Unknown»: sin conclusión. «Not booting»: el juego no arrancó. «Boots»: solo se confirmó el arranque. «Runs with issues»: hubo problemas durante la partida. «Playable»: la persona que hizo la prueba pudo seguir jugando.
Compatibility results
Game Compatibility Results
Recorded performance
Performance by Build and Hardware
Open a game for its test details. Start with a GPU and build close to your own, then explore the driver, FPS, and gameplay notes.
No games match these filters. Try a different name, GPU, or build, or clear a filter to broaden the search.
Donkey Kong Bananza Reported platform: unknown
Also listed as: dkb
| Build | Status | GPU / CPU | FPS | Details |
|---|---|---|---|---|
| build-70 | playable | Not provided / Not provided | Not provided | Open report |
| Not provided | runs with issues | Not provided / 9900X | Not provided | Open report |
| 31 | runs with issues | RX 6600 / i5-12400 | Not provided | Open report |
| Not provided | runs with issues | 5070ti / 9800x3d | Not provided | Open report |
| nx2 build 65 (3bdd53d) | runs with issues | Sapphire nitro+ 7900XTX / 9800x3D | Not provided | Open report |
| Not provided | unknown | RX 9070 XT / Not provided | Not provided | Open report |
| Not provided | not booting | AMD RX 6000 series or older / Not provided | Not provided | Open report |
build-70 report
Statusplayable
GPUNot provided
CPUNot provided
DriverNot provided
Recorded FPSNot provided
Problems or notes: Runs well, though not at a locked 60 fps.
Not provided report
Statusruns with issues
GPUNot provided
CPU9900X
Driver615.74
Recorded FPSNot provided
Problems or notes: Purple screen when entering the game.
31 report
Statusruns with issues
GPURX 6600
CPUi5-12400
DriverNot provided
Recorded FPSNot provided
Problems or notes: Crashes when loading after the main menu. A commenter speculated that the issue involved shader cache; this was not confirmed.
Not provided report
Statusruns with issues
GPU5070ti
CPU9800x3d
Driver621.01
Recorded FPSNot provided
Problems or notes: The DK character appears all black during the banana-collection cutscene, then returns to normal. The reporter said the issue persisted when retested on build-70.
nx2 build 65 (3bdd53d) report
Statusruns with issues
GPUSapphire nitro+ 7900XTX
CPU9800x3D
Driver26.10.1
Recorded FPSNot provided
Problems or notes: A black rectangle appears in what should be a mini-example guide; the reporter says the issue also occurs on build 70.
Not provided report
Statusunknown
GPURX 9070 XT
CPUNot provided
DriverNot provided
Recorded FPSNot provided
Problems or notes: The issue's reproduction text says it has worse FPS than most other forks; no specific FPS or separate test details are given.
Not provided report
Statusnot booting
GPUAMD RX 6000 series or older
CPUNot provided
DriverNot provided
Recorded FPSNot provided
Problems or notes: User reports that the game crashes when the loading screen appears on Windows 10.
Related game issues
- [Crash] (open)
- [Crash] Bananza runs at ~57 fps then aborts silently, 0xC0000409 at +0x2ecd3bd (closed)
- Black DK when finding banana (closed)
- [Crash] rx 6800xt all emulators crash on loading screen (open)
- [VBug] Build 93 finaly has no major visual errors but has poor performance 9070xt (open)
- [UIBug] Bananza — build 93 (open)
- [Crash] donkey kong and ocarina crash on AMD 6800xt (open)
- Donkey Kong Bananza (040074A01BF12000): fatal 2111-3604 right after a VP9 video reaches end of stream (nx2:vdecsvc) (closed)
- [GBug] Donkey Kong Bananza locked at 20 fps (open)
- Donkey kong bananza Crash loading (closed)
- [VBug] Shadow artifacts (closed)
- [GBug] Donkey kong bananza, black rectangle (closed)
- Donkey Kong Bananza: terrain missing (white/black) on builds 70 and 75, renders correctly on build 65 (open)
- donkey kong bananza purple screen issue (closed)
- Release note: Crashes after the continue-game loading screen.
- Release note: On build 70 (286117c), the MSVC package reportedly aborted after about 133.8 seconds of gameplay with 0xC0000409; the MinGW PGO package reportedly aborted on the intro screen with the same offset.
- Release note: DK appears all black during the cutscene when finding or collecting a banana, then returns to normal.
- Release note: User reports the game crashes when the loading screen appears on Windows 10 with an AMD RX 6000 series or older graphics card.
- Release note: The issue says FPS is worse than on most other forks.
- Release note: On build 93, FPS fluctuates approximately between 20 and 60, with frequent periods around 30 and drops to 25–28 FPS in the Dragon Layer; GameSir G7 Pro rumble can be excessive, occur without an obvious trigger, or continue longer than expected.
- Release note: User reports a crash when loading a save on AMD RX 6000 series or older under Windows 11.
- Release note: A VP9 video reaching end of stream triggers error 2111-3604 and freezes emulation; the video panel appears as a solid yellow box in stable-1.0.0.
- Release note: User reports the game is locked at 20 FPS, including menus and title screen, on Windows 11.
- Release note: Crashes when loading after the main menu on build 31.
- Release note: User reports the picture is covered with artifacts, especially on shadows.
- Release note: A black rectangle appears in what should be a mini-example guide; the reporter says it also occurs on build 70.
- Release note: On Windows builds 70 and 75, terrain/world renders solid white while the HUD and characters still render. On build 75, EDEN_NX2_RESETFIX=0 changes the ground to black with no texture or lighting.
- Release note: Purple screen after starting the game and entering it.
Compared with Previous Build
Current: build-70 (2 records); previous: build-65 (0 records).
Donkey Kong Bananza Reported platform: Windows x86_64
| Build | Status | GPU / CPU | FPS | Details |
|---|---|---|---|---|
| nx2-20261031 | boots | Not provided / Not provided | Not provided | Open report |
nx2-20261031 report
Statusboots
GPUNot provided
CPUNot provided
DriverNot provided
Recorded FPSNot provided
Problems or notes: Completed a 180-second GUI check; long-term memory stability and broader game compatibility remain unverified.
Related game issues
- [Crash] (open)
- [Crash] Bananza runs at ~57 fps then aborts silently, 0xC0000409 at +0x2ecd3bd (closed)
- Black DK when finding banana (closed)
- [Crash] rx 6800xt all emulators crash on loading screen (open)
- [VBug] Build 93 finaly has no major visual errors but has poor performance 9070xt (open)
- [UIBug] Bananza — build 93 (open)
- [Crash] donkey kong and ocarina crash on AMD 6800xt (open)
- Donkey Kong Bananza (040074A01BF12000): fatal 2111-3604 right after a VP9 video reaches end of stream (nx2:vdecsvc) (closed)
- [GBug] Donkey Kong Bananza locked at 20 fps (open)
- Donkey kong bananza Crash loading (closed)
- [VBug] Shadow artifacts (closed)
- [GBug] Donkey kong bananza, black rectangle (closed)
- Donkey Kong Bananza: terrain missing (white/black) on builds 70 and 75, renders correctly on build 65 (open)
- donkey kong bananza purple screen issue (closed)
- Release note: Crashes after the continue-game loading screen.
- Release note: On build 70 (286117c), the MSVC package reportedly aborted after about 133.8 seconds of gameplay with 0xC0000409; the MinGW PGO package reportedly aborted on the intro screen with the same offset.
- Release note: DK appears all black during the cutscene when finding or collecting a banana, then returns to normal.
- Release note: User reports the game crashes when the loading screen appears on Windows 10 with an AMD RX 6000 series or older graphics card.
- Release note: The issue says FPS is worse than on most other forks.
- Release note: On build 93, FPS fluctuates approximately between 20 and 60, with frequent periods around 30 and drops to 25–28 FPS in the Dragon Layer; GameSir G7 Pro rumble can be excessive, occur without an obvious trigger, or continue longer than expected.
- Release note: User reports a crash when loading a save on AMD RX 6000 series or older under Windows 11.
- Release note: A VP9 video reaching end of stream triggers error 2111-3604 and freezes emulation; the video panel appears as a solid yellow box in stable-1.0.0.
- Release note: User reports the game is locked at 20 FPS, including menus and title screen, on Windows 11.
- Release note: Crashes when loading after the main menu on build 31.
- Release note: User reports the picture is covered with artifacts, especially on shadows.
- Release note: A black rectangle appears in what should be a mini-example guide; the reporter says it also occurs on build 70.
- Release note: On Windows builds 70 and 75, terrain/world renders solid white while the HUD and characters still render. On build 75, EDEN_NX2_RESETFIX=0 changes the ground to black with no texture or lighting.
- Release note: Purple screen after starting the game and entering it.
Compared with Previous Build
Fast Fusion Reported platform: Windows 11
| Build | Status | GPU / CPU | FPS | Details |
|---|---|---|---|---|
| release-binaries #80 | unknown | NVIDIA RTX 50 series / Not provided | 23–24 FPS | Open report |
release-binaries #80 report
Statusunknown
GPUNVIDIA RTX 50 series
CPUNot provided
DriverNot provided
Recorded FPS23–24 FPS
Problems or notes: User reports that the game runs at a maximum of 23–24 FPS.
Related game issues
Compared with Previous Build
Fire Emblem Reported platform: unknown
| Build | Status | GPU / CPU | FPS | Details |
|---|---|---|---|---|
| build-70 | runs with issues | NVIDIA RTX 40 series / Not provided | Not provided | Open report |
build-70 report
Statusruns with issues
GPUNVIDIA RTX 40 series
CPUNot provided
DriverNot provided
Recorded FPSNot provided
Problems or notes: A user reported that Fortunes Weave skips pre-rendered videos, including the opening cut-scene, and proceeds to the in-engine scene.
Related game issues
- DLSS does not work in FE Fortune's Weave - no Game DLSS Network detection (open)
- [Crash] VK_ERROR_DEVICE_LOST, FEFW (Linux + AMD) (open)
- [GBug] Fire Emblem Fortunes Weave - FMVs Skipped/Do not play. (closed)
- Screen Shaking (Fire Emblem Fortune's Weave) (closed)
- Release note: A user reports that DLSS replacement does not detect the game's DLSS evaluation in Fire Emblem: Fortune's Weave: no Game DLSS network or NVIDIA DLSS (Streamline) line appears, while guest tensor operations run on cooperative matrices and GPU usage is high.
- Release note: On Linux with AMD graphics, Fire Emblem: Fortune's Weave can crash after a black screen with VK_ERROR_DEVICE_LOST and a GPU reset.
- Release note: A user reported that Fortunes Weave skips pre-rendered videos, including the opening cut-scene.
- Release note: Screen and camera shaking during play on build 65.
Compared with Previous Build
Current: build-70 (1 record); previous: build-65 (1 record).
Showing 11–20 of 308 reports
Known issues from Lichii sources
Known Game Issues
Zelda: Ocarina of Time
The console restarts after the scene on Linux with a lenovo legion go 2 z2 and egpu 7600xt; the report names versions 83 et 93.
The Legend of Zelda: Ocarina of Time (Switch 2)
Two hidden/minimized Windows CLI launches crashed in nvoglv64.dll with exception 0xc0000094 at offset 0xEFC9BB. Static findings identify stale SDL visibility state and no zero-extent guard as possible leads, but neither is proven to cause the crash.
Other / not listed
An AMD Linux report describes GPU/display blackout and VK_ERROR_DEVICE_LOST on entering gameplay without EDEN_NX2_NO_MESH=1; the user reports at least five minutes of gameplay with the option enabled. Another AMD Linux report describes intermittent SIGSEGV crashes that occur with or without the option.
Other / not listed
Random dynarec crashes during gameplay, reported on Linux with AMD graphics cards; one report specifies an AMD RX 7000 series GPU.
Other / not listed
Overexposure in specific areas, including the lower part of Saria's house and the right side of the entrance to hyrule castle.
Ocarina of Time
Audio and video become desynchronized on the title screen, intro, and initial dream cutscene; a commenter reports slow-motion live-rendered video and an audio lead of approximately 3 seconds.
The Legend of Zelda: Ocarina of Time
On an AMD Radeon RX 6700 XT with AMD Software (Adrenalin) 26.10.2, Lichii closes during the first shader rebuild after about 9-10 minutes; Event Viewer reports an access violation in amdvlk64.dll.
Donkey Kong Bananza
On build 93, FPS fluctuates approximately between 20 and 60, with frequent periods around 30 and drops to 25–28 FPS in the Dragon Layer; GameSir G7 Pro rumble can be excessive, occur without an obvious trigger, or continue longer than expected.
Zelda: OoT Remake
Constant 4 FPS in-game on AMD Radeon RX 570 4GB.
Showing 261–270 of 361 issues
Notas de versiones recientes
Cambios de compatibilidad en las últimas versiones
Versión build-117 · Ocarina of Time
Fixed a crash during shader building on Windows drivers for RX 6000 (RDNA2), RX 5000 (RDNA1), Vega, and Polaris cards. The faster matrix path now runs only on RDNA3 and newer.
Versión build-116 · Zelda: Ocarina of Time
Ocarina of Time is described as very stable; foliage and Hyrule Field grass rendering are fixed, and many users get 60+ fps.
Versión build-116 · Zelda: Ocarina of Time
NVIDIA DLSS Super Resolution can replace the game's own upscaler on RTX cards; the setting is experimental.
Versión build-116 · Zelda: Ocarina of Time
A new option turns off the game's sharpening anti-aliasing; the default Game setting behaves as before, and DLSS takes priority if both are enabled.
Versión build-116 · Mario Tennis Fever
The game runs fully at 60 fps, and texture glitches are fixed.
Elegir una versión
¿Qué versión debo usar?
Elige un juego arriba para ver qué versiones probadas puedes descargar. Mientras tanto, usa la descarga más reciente y lee sus notas.
Prueba la última versión disponible: build-117. Conserva una versión que funcione por si necesitas volver a ella durante las pruebas.
Dudas sobre compatibilidad
Preguntas frecuentes sobre compatibilidad de juegos
¿Cómo comparto un juego con estos filtros?
Aplica los filtros de juego, estado, GPU y versión y copia la URL de la página. Un enlace a un juego concreto abre su ficha de informes.
¿Qué puedo probar si aparece una pantalla negra?
Revisa en otros informes si el juego llega a los menús o permite jugar. Anota el controlador y el motor de renderizado y busca el juego o el error en la guía de solución de problemas.
¿Por qué puede dar resultados distintos la misma GPU?
La versión del controlador, los ajustes gráficos, la carga de la CPU y el tramo del juego que se prueba pueden cambiar el resultado. Compara estos detalles antes de cambiar tu configuración.
¿Dónde puedo aportar un resultado que no aparece?
Usa el gestor oficial de incidencias de Lichii. Indica el juego, la etiqueta de la versión, el hardware, el controlador, los ajustes y los pasos para reproducir lo que viste.